LDM 220

Features

• Can be used with DMC 2000 Series Dosimeters
• Pass by data exchange with range adjustment
• Access control by area and sub-area (with emergency operating mode)
• Dosimeter setup
• Acquisition of dose and dosimeter status
• Dosimeter identification for dose mapping
• Inputs / outputs for connection to a security gate, turnstile, badge reader

Application

Specifications

• Length: 110 x 6 5x 28 mm
• Weight: 110g

• Self powered through USB port
• Input: 90 to 265 VAC- 47 to 63 Hz
• Output: 9 V DC delivered with interchangeable US and Europe mains plug
• Consumption: typical 100 mA under 9 V
• Option (on request, please consult us):
• Power supply by 2AAA 1,5 V batteries
• Autonomy on batteries: typical 10 hours
• EMC: complies with and exceeds CE standards

• Operating temperature: 0 to +50°C (32°F to 122°F)
• Storage temperature: -10°C to +60°C (+14°F to 140°F)
• Humidity: 90% HR (without condensation)

• Short range high frequency bi-directional data exchange
• Nominal range: between 20 and 30 cm (7.87 and 11.81")
• Reduced range setting: between 5 and 20 cm (1.96 and 7.87")

• Two-color electroluminescent diode used as ON/OFF and data exchange indicator lamp
• Two-color electroluminescent diode for READY/BUSY indication
• Two-color electroluminescent diode for ACCESS/NO ACCESS indication
• SUBD9 - pin female connector for RS 232 data link (only applies to the LDM210 only)
• JACK connector 5.5 mm x 2.1 mm for DC power supply (RS 232) (LDM210 only)
• 2 HE10, 2 x 7- pin male connectors for 4 digital inputs and 4 digital outputs
• Software downloadable and saved in flash

Accreditation Logos

Click here to download the ED Readers Dosimeter data sheet.

Download Adobe Reader